Chủ nhật, 25/03/2018 00:28
Nghiên cứu thực nghiệm hiệu quả gia cường dầm bê tông cốt thép chịu xoắn bằng vật liệu tấm sợi các bon CFRP
Nguyễn Trung Hiếu*, Lý Trần Cường
*Tác giả liên hệ: Email: hieunt@nuce.edu.vn
Ngày nhận bài: 12/12/2017; ngày chuyển phản biện: 18/12/2017; ngày nhận phản biện: 19/01/2018; ngày chấp nhận đăng: 29/01/2018
Tóm tắt:
Nội dung bài báo trình bày kết quả nghiên cứu thực nghiệm sự làm việc của dầm bê tông cốt thép (BTCT) chịu xoắn được gia cường bằng vật liệu tấm sợi các bon (CFRP); 6 mẫu dầm thí nghiệm có cùng kích thước hình học và cấu tạo cốt thép được chế tạo, trong đó 2 mẫu dầm không được gia cường và 4 mẫu được gia cường chống xoắn bằng tấm sợi CFRP. Các kết quả thực nghiệm về cơ chế phá hoại, mô men xoắn cực hạn, góc xoay, tình trạng nứt của các mẫu thí nghiệm được trình bày và thảo luận. Những kết quả thu được từ nghiên cứu này cho thấy hiệu quả của việc sử dụng tấm sợi CFRP trong gia cường kết cấu dầm BTCT chịu xoắn.
Từ khóa:
Dầm, gia cường, tấm sợi composite, xoắn.
Experimental study on the strengthening efficiency of reinforced concrete beams under torsion using CFRP sheets
Trung Hieu Nguyen*, Tran Cuong Ly
National University of Civil Engineering
Received: 12 December 2017; accepted: 29 January 2018
Abstract:
This paper presents an experimental study on the torsional behavior of reinforced concrete (RC) beams strengthened with externally bonded carbon fiber reinforced polymer (CFRP) sheets. Six identical specimens were cast. The concrete grade and the steel reinforcement ratio were kept constant for all specimens. Two specimens without being strengthened were the control specimens, while the four other specimens were strengthened with CFRP composite sheets. In the experimental findings, the failure mode, the ultimate torsional moment, the crack patterns of tested specimens were presented and discussed. The obtained results from this research clarified the torsional behavior of beams strengthened by CFRP and the strengthening effectiveness in the torsional capacity of RC beams using this material.
Keywords:
Beam, composite sheet, strengthening, torsion.
Classification number:
2.1